Table of Contents
Advertisement
The color c hanger
Knitting with one color
22
Setting up the color changer when the
cam box stops at the left-hand side.
1. Before you set up the color
changer anew, you should always set
it to the out of working position by
pressing the discharge flap under the
color changer. This causes all black
keys to snap up.
If there remain feeder holders in the u p
position, push them down manually.
2. Set the color changer (C) to 2.
3. Press down the black key in front
of the first feeder from the left until it
clicks into position.
The color changer is now set up for one
color knitting. When the cam box moves
to the right, it takes over the first feeder.
Note: If a different feeder from the one
you want is in the cam box do not put the
empty holder down but leave it up, ready
to receive the unwanted feeder.
Advertisement
Table of Contents
