Initial Configuration; Setting Temperature And Humidity Values And Enabling T/H Sensors - Huawei NetCol5000-A025 User Manual

NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width)

4.5.3 Initial Configuration

4.5.3.1 Setting Temperature and Humidity Values and Enabling T/H Sensors

Prerequisites
●
●
●
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H sensor, as shown
in Figure Setting temperature and humidity
Figure 4-17 Setting temperature and humidity values
Step 2 Set Cold aisle sensor 1 to Enable.
Step 3 Set the temperature and humidity values by referring to
Issue 15 (2020-12-10)
The T/H sensors outside the cabinet need to be enabled when they are
installed, otherwise, skip
If you need to enable a humidity and temperature sensor, log in as the admin
user.
This section describes how to enable Cold aisle sensor 1.
NO TE
You are not recommended to modify the parameters not listed in
Copyright © Huawei Technologies Co., Ltd.
Step 2.
values.
4 Power-On Commissioning
Table 4-14.
Table 4-14.
136