Removing The Transport Fasteners - Huawei NetCol5000-A025 User Manual

NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width)

3.6 Removing the Transport Fasteners

Context
● When moving a cabinet, take measures to prevent it from toppling.
● The two compressor fasteners and one liquid level detector fastener installed
for transport protection must be removed. Otherwise, the equipment may fail
to work properly.
Procedure
Step 1 Loosen the two bolts at the bottom corners of the compressor using a 13# socket
wrench, take out the transport fasteners under the bolts, and then tighten the
bolts to a recommended torque of 13 N·m using a torque wrench, as shown in
Figure
Store the removed transport fasteners. They should be reinstalled if the equipment
needs to be transported in future.
Figure 3-18 Removing the transport fasteners from a compressor
Issue 15 (2020-12-10)
NO TICE
3-18.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
48