How Do I Export Or Import A Configuration File - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
Procedure
Step 1 Choose Maint > USB Operations > Export to enter the Select Path screen.
Step 2 Tap the file where the user saves current data in the Select Path dialog box and
tap Next. Then tap Yes in the displayed dialog box.
Step 3 After the data is successfully exported, tap Finish.
Step 4 On the home screen, choose Maint > USB Operations > Remove USB to remove
the USB flash drive in safe mode.
----End

8.1.18 How Do I Export or Import a Configuration File?

Context
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
You can export parameter configurations for smart cooling product 1 to a USB
flash drive. If smart cooling product 2 needs the same parameter configurations,
import the configuration file to smart cooling product 2.
Procedure
Step 1 On the home screen of smart cooling product 1, choose Maint > USB Operations
> Export Config. The Select Path screen is displayed.
Step 2 Tap the file where the user saves current data in the Select Path dialog box and
tap Next. Then tap Confirm in the displayed dialog box.
Step 3 After the data is successfully exported, tap Finish.
Step 4 On the home screen, choose Maint > USB Operations > Remove USB to remove
the USB flash drive in safe mode.
Step 5 On the home screen of smart cooling product 2, choose Maint > USB Operations
> Import Config.
Step 6 Select the file package to be imported and tap Next.
Step 7 Choose Confirm and tap Next.
Step 8 After the import is complete, tap Finish.
Issue 06 (2022-12-15)
NO TE
● Before exporting active alarms, historical alarms, logs, and configurations, ensure that
the USB flash drive has been successfully identified. The USB port is located on the side
of the main control board.
● If the USB flash drive has been successfully identified,
● If the USB flash drive is not properly connected, the system will display No USB device
found. during operations about the USB flash drive.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 FAQ
is displayed in the status bar.
173