Huawei NetCol5000-A025 User Manual page 155

NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width)
No.
6
----End
Follow-up Procedure
After you have completed the settings, perform the following checks to confirm
whether the teamwork control is available:
1.
2.
3.
4.
Issue 15 (2020-12-10)
Parameter Note
s
Ground Red indicates that a critical alarm is generated, as shown in
color: red,
bright gray
Bright gray indicates that the device is operating without
any critical alarms, as shown in
NO TE
If teamwork succeeds, the teamwork icon is green. If teamwork fails, the teamwork icon is
red. If teamwork mode is disabled, the teamwork icon is gray.
Check whether the device number on the topology is the same as the actual
device number.
– If yes, go to 2.
– If no, check the cable connection and the settings of teamwork control
parameters.
Check whether the number of active devices on the topology is the same as
the actual device number.
– If yes, go to 3.
– If no, check the cable connection and the settings of teamwork control
parameters.
Check whether the number of standby devices on the topology is the same as
the actual device number.
– If yes, go to 4.
– If no, check the cable connection and the settings of teamwork control
parameters.
Check whether the number of online devices on the topology is the same as
the actual device number.
– If yes, the check is complete.
– If no, check the cable connection and the settings of teamwork control
parameters.
Copyright © Huawei Technologies Co., Ltd.
.
4 Power-On Commissioning
.
145