Routine Maintenance Overview Checklist - MTS Systems Landmark 370 Series Operation

Maintenance

Routine Maintenance Overview Checklist

Recommended service to be performed at each running time interval noted
Calendar Time using 8 hour
Running Time rate per day
Running Time-Hours
Check that Actuator Platen Area is
Clean
Monitor Filter Indicators
Check Hoses/Cables/Connectors
Check Crosshead/Lifts/Supports
Check Actuator to be Dry
Check Hydraulic Service Manifold
Check Lift Seal Condition to be Dry
Check Lock Seal Condition to be Dry
Bionix Lubricate Axial/Torsional
Spline (75-100 hrs)
Check Actuator
Label Inspection
Crosshead/Load Frame
Check Crosshead/Lifts/Supports
Lift Seal Condition is Dry
Lock Seal Condition is Dry
Crosshead Columns are Clean
Column Abrasions are Acceptable
Crosshead Speed is Appropriate
1
Symbol denotes services performed by equipment operators. Most of these procedures involve visual
checks that should not interfere with test system operation. These checks are also completed by
trained field service engineers on each Routine Maintenance visit.
2
Symbol denotes service performed by trained field service engineers as part of an MTS Routine
Maintenance plan. Some of these procedures require special service tools and/or specific service
training to complete.
116
Daily Weekly Biweekly
8 40 80
1
X
X
X
X
X
X
X
X
X
X
X
2
MTS
MTS
MTS
MTS
MTS
MTS
500 1000 1,500 2,000
MTS MTS MTS
MTS MTS MTS
MTS MTS MTS
MTS MTS MTS
MTS MTS MTS
MTS MTS MTS
Landmark™ Test System Operation
Annually
MTS
MTS
MTS
MTS
MTS
MTS