MTS Systems Landmark 370 Series Operation page 112

Running the Example HCF Test
3. Reset/Override the Interlock.
In the Station Manager application main window, click the Reset/Override button three
times to override the Interlock for 21 seconds, and then power up the HPU and HSM.
4.
Warning:
Do not move the control slider until the crush zone is clear, and you can monitor
actuator movement.
Unskilled movement of the actuator can result in machine damage or personal injury.
Ensure that the area is clear, that you can see what you are doing, and that you have
the necessary skill to proceed safely.
112 Landmark™ Test System Operation