MTS Systems Landmark 370 Series Operation page 68

Running the Example HCF Test
1. Select the Tuning user access level.
In order to set tuning parameters, select the Tuning rather than Operator user access level.
A. Do this by changing the drop-down selection box to Tuning in the Station Manager
application main window.
B. Enter the password Tuning (case sensitive) when prompted.
2. Set Displacement tuning parameters.
A. Open the Tuning: Landmark 1 Displacement window by selecting Station
Manager >Display > Station Setup > Channels > Landmark 1 (or other
depending on your configuration) > Displacement, clicking the Tuning Fork
button, and clicking the Adjustments tab.
B. Use the following parameters for this hard specimen test:
Important: The following numbers were appropriate for the example test on a
typical system. You will need to adapt these entries to your specimen, test, and
system.
68 Landmark™ Test System Operation