Run The Example Hcf Test - MTS Systems Landmark 370 Series Operation

2. Minimize the Station Manager application.
Click the minimize button in the upper right corner of the Station Manager application.
3. Verify that the Station Manager application is still running by checking for it in the task bar.
You can maximize Station Manager at any time by clicking the Station Manager button in the
task bar.

Run the Example HCF Test

1. Running the example HCF (high cycle fatigue) test consists of the following steps:
A. "Open the MPX Application"
B. "Select the Test"
C. "If Necessary, Correct Any Resource Errors"
D. "Create a New Test Run"
E. "Run the Test"
F. "Review the Results"
G. "Generate a Report"
H. "Save the Test and Minimize MPX"
Landmark™ Test System Operation
on page 94
on page 94
on page 95
on page 97
on page 98
on page 99
on page 100
Running the Example HCF Test
on page 95
93