Save The Test And Minimize Mpx; Remove The Specimen - MTS Systems Landmark 370 Series Operation

Running the Example HCF Test
A. In the MTS TestSuite main window Explorer panel under Test Runs, select the test
run for which you want to run a report.
B. Right click and select Generate Report.
C. Select the template you wish to use and click Generate Report.

Save the Test and Minimize MPX

The Station Manager application is used to remove the specimen, so the test can be saved and the
MPX application minimized.
1. Save the test.
If desired, save the test with a new name to preserve the original test.
2. Minimize the TWX application.
Click the minimize button in the upper right corner of the TWX application.

Remove the Specimen

Removing the specimen consists of the following steps:
1. "Remove Displacement Limits"
2. "Switch to Running Max/Min Displacement and Force Meters"
3. "If Appropriate, Remove the Intact Specimen"
4. "If Appropriate, Remove the Broken Specimen"
100
on page 101
on page 102
on page 105
on page 101
Landmark™ Test System Operation