Selecting And Saving Parameter Sets; How Mts Files Work Together - MTS Systems Landmark 370 Series Operation

Concept of the Station Manager Application Creating a Parameter Set

Selecting and Saving Parameter Sets

You select a Parameter Set when you open your Station Configuration. It is a good idea to save your
parameter set periodically during station setup as you make changes in the Station Manager
application.
Concept of a Station Configuration File Paired with a Parameter Set

How MTS Files Work Together

The basic workflow is as follows:
You use the Station Manager application to open a Station Configuration.
l
You select a Parameter Set (which includes specific Sensor Calibration files) for your Station
l
Configuration.
You use the Station Manager application to optimize your Station Configuration for the test
l
you desire to run.
While keeping the Station Manager application running, you use the Multipurpose Express
l
application to select the Test Procedure appropriate for your test.
You start the test with the Multipurpose Express application.
l
You create a Test Report with the Multipurpose Express application.
l
Landmark™ Test System Operation
Using MTS Applications and Files to Run Tests
Key Concepts
47