Creating And Modifying Parameter Sets - MTS Systems Landmark 370 Series Operation

Key Concepts
File Type
Sensor
Calibration
Files
Test
Template
Files
Test
Procedure
Files
Reports

Creating and Modifying Parameter Sets

You use the Station Manager application to create and modify parameter sets. Parameter Sets define
the operational characteristics of the resources in your station. You can create up to 15 Parameter
Sets per configuration.
46
Station File Types (continued)
Description
Sensor Calibration files (.scf) contain information about system
sensors, including model number, date, calibration type, and
conditioner information. You use the Station Manager application to
select Sensor Calibration files for your Station Configuration. Sensor
Calibration files are part of the Parameter Set.
Test Template files are command files created with Multipurpose Elite
for performing tests on Station Configurations. Test Template files
contain only test definition information.
MTS TestSuite Test Template Icon
Test Procedures files are similar to Test Template files, but include a
container that stores test data and results. You can create a Test
Procedure file from scratch, or by selecting a Test Template file,
which automatically copies the test definition information and adds a
container for test data.
MTS TestSuite Test Procedure Icon
When you run a test report, data is sent from MTS TestSuite MP
Express to an Excel spreadsheet. The spreadsheet can be viewed
even if you do not have Excel on the interface PC using the Excel
viewer.
Landmark™ Test System Operation