Running the Example HCF Test
7. Reset the Lower (Compression) Limit.
A. Navigate to Station Manager >Display > Station Setup > Channels >
Landmark 1 (or other depending on your configuration) > Force > Limits.
B. Enter -50 N in the Lower Limit text box and ensure that Interlock is selected for the
Action.
8. Release the upper grip.
Using the controls on the load frame, release the upper grip.
9. If necessary, repeat the upper grip clamping process.
If Necessary, Recover from a Tripped Displacement Limit
There are a number of possible causes for a tripped displacement limit. For example:
110
Landmark™ Test System Operation