MTS Systems Landmark 370 Series Operation page 103

A. From the Station Manager application main window, click the Manual Command
button to open the Manual Command window.
B. Select the following parameters:
C. Type 0 in the Manual Cmd text box and press Enter.
3. Switch to Displacement control mode.
This prevents unwanted movement of the actuator.
A. In the Station Manager application main window, click the Manual Control button.
B. In the Manual Controls window Control Mode drop-down list, select Displacement.
4. Release the upper grip.
Use the controls on the load frame.
5.
Warning:
Do not move the control slider until the crush zone is clear, and you can monitor
actuator movement.
Unskilled movement of the actuator can result in machine damage or personal injury.
Landmark™ Test System Operation
Channel — Landmark 1 (or other depending on your configuration)
l
Control Mode — Force
l
Enable Manual Command — Checked
l
Running the Example HCF Test
103