MTS Systems Landmark 370 Series Operation page 32

System Introduction
Setting Up Meters
l
Setting Up a Scope
l
Applying Power to the Station
l
Moving the Actuator (for specimen installation)
l
Using the Function Generator
l
Setting Tuning Parameters
l
The Station Manager application windows associated with each task are shown below.
Opening a Station
Using the Open Station window, you can select a configuration and a parameter set. You can also
select an interlock chain, although it is common practice to select Interlock 1.
Using the Main Window to Open Other Windows
While the main window provides access to nearly all of the Station Manager application's functionality,
the Example HCF Test and most other tests require only limited interaction with the main screen.
Common access points to other windows used in the Example HCF Force Test are boxed in red.
32 Landmark™ Test System Operation