If You Contact Mts By Phone; Identify System Type; Be Prepared To Troubleshoot; Write Down Relevant Information - MTS Systems Landmark 370 Series Operation

If You Contact MTS by Phone

A Call Center agent registers your call before connecting you with a technical support specialist. The
agent asks you for your:
Site number
l
Email address
l
Name
l
Company name
l
Company address
l
Phone number where you can be reached
l
If your issue has a case number, please provide that number. A new issue will be assigned a unique
case number.

Identify system type

To enable the Call Center agent to connect you with the most qualified technical support specialist
available, identify your system as one of the following types:
Electrodynamic material test system
l
Electromechanical material test system
l
Hydromechanical material test system
l
Vehicle test system
l
Vehicle component test system
l
Aero test system
l

Be prepared to troubleshoot

Prepare to perform troubleshooting while on the phone:
Call from a telephone close to the system so that you can implement suggestions made over
l
the phone.
Have the original operating and application software media available.
l
If you are not familiar with all aspects of the equipment operation, have an experienced user
l
nearby to assist you.

Write down relevant information

In case Technical Support must call you:
Verify the case number.
l
Record the name of the person who helped you.
l
Write down any specific instructions.
l
Landmark™ Test System Operation
Technical Support
9