Running the Example HCF Test
2. If more than one meter appears, delete the extra instances so that only one meter remains.
To delete a meter, click the meter title bar, and then click the Delete button in the setup menu.
3. Set up a Running Max/Min Displacement Meter.
Use the following parameters:
Meter Type — Running Max/Min
l
Channel — Landmark 1 (or other depending on your configuration)
l
Signal — Displacement
l
Engineering Units — mm
l
A running max/min meter provides the history of sensor extremes that the meter has read
since it was last reset.
4. Set up a Running Max/Min Force Meter.
62
Landmark™ Test System Operation