System Introduction
Load Frame Overview
Introduction
The load unit consists of the load frame plus additional parts, such as hydraulic crosshead lifts and
control modules. Load units come in different sizes and configurations. The following illustration shows
a typical load unit with common accessories.
Component Identification
Item Component
1
Crosshead
2
Hydraulic
Crosshead
Lifts
3
Grips
28
Load Frame Front and Rear View
Description
Moves up and down the columns to accommodate specimens of different
lengths.
Raises and lowers the crosshead. (Optional)
Grasp and hold the specimen in place during testing. Hydraulic grips are
shown, but there are many different kinds of devices to hold specimens.
Landmark™ Test System Operation