Prepare To Run The Test; Perform Basic Performance Tuning - MTS Systems Landmark 370 Series Operation

2. Reset meter history.
Now that specimen installation is complete, reset meter history by navigating to Station
Manager >Display > Meters and clicking the Reset button.

Prepare to Run the Test

Preparing to run the test consists of the following steps:
1.

"Perform Basic Performance Tuning"

2. "Switch to Peak Valley Meters"
3. "Adjust Limits for the Test"
4. "Show Station Manager Scope and Meters for the Test"
5. "Minimize Station Manager"
Perform Basic Performance Tuning
Use the following guidelines for basic performance tuning.
1. Select the Tuning user access level.
Ensure that your user access level is Tuning rather than Operator. Enter the password
Tuning (case sensitive) if prompted.
Landmark™ Test System Operation
on page 79
on page 88
on page 90
on page 92
Running the Example HCF Test
on page 91
79