Renaming Presets And Custom Ccu Scenes; Working With Preset Chains - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

Renaming Presets and Custom CCU Scenes

C
AMERA PAGE
You can rename presets and custom scenes. The process is the same for both. Right-click the button for
the custom scene or preset, and edit the label.

Working with Preset Chains

C
AMERA PAGE
Preset chains automate the process of moving through a series of shots. If you know people will want to
move the camera through the same set of shots routinely, program a preset chain.
Things to know about preset chains:
Each chain can have up to 12 waypoints; each of these can be an existing preset or a shot that you set
n
up as you create the chain.
You can set the chain to run once, or to run as a continuous loop.
n
Individual waypoints can be reordered or deleted.
n
Custom waypoints can be recalled to view the shot, and changed as needed.
n
Each waypoint allows you to specify a delay after movement.
n
Preset chains may be set to run in a continuous loop, or just once.
n
Preset chains can be stopped while running.
n
30