Managing Access And Passwords; Configuring Other Security Settings - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

Managing Access and Passwords

S
ECURITY PAGE
The Account Passwords and Web Server areas of the Security page provide basic security for the web
interface:
Admin password – Required for access to the admin pages of the web interface and for Telnet access
n
to the device. There is no default admin password.
User password – Required for access to the operator's page of the web interface unless guest access
n
is enabled. There is no default user password.
Automatically Expire Idle Sessions – By default, sessions expire after 30 minutes with no
n
interactions.
Allow Guest Access – Allows people to browse to the operator's page of the web interface without
n
logging in. If guest access is not enabled, no controls are available until you log in. Guest access is
disabled by default.
Note
Consult your network security specialist before changing any of these settings.

Configuring Other Security Settings

S
ECURITY PAGE
Security settings include:
Enabling or disabling access via Telnet (by default, access via Telnet is disabled)
n
Enabling or disabling access via VISCA Over IP (by default, VISCA Over IP is disabled)
n
Enabling or disabling HTTP for web access (by default, access via HTTP is disabled) and installing the
n
SSL certificate
Allowing or denying device discovery (allowed by default)
n
18