Setting The Custom Home Position And Other Preset Shots - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

Setting the Custom Home Position and Other Preset Shots

C
AMERA PAGE
The camera's default home position is 0° pan and 0° tilt, at 1x zoom; you can set a different home position.
You can also define other presets for shots that you expect to use repeatedly.
Note
Storing a preset overwrites any information that was previously associated with that preset. The Store
Preset dialog does not show which presets have already been defined. Vaddio recommends renaming
presets when you store them.
To store a preset or custom home position:
1. Set up the shot. If necessary, adjust color and lighting (CCU settings) as well.
2. Select Store to open the Store Preset dialog.
3. Select the preset to define.
4. Select Store with Current Color Settings to save the current CCU settings along with the camera
position.
5. Select Save with Tri-Sync to allow the pan, tilt, and zoom motors to move simultaneously from other
presets to this position.
6. Store the preset.
Notes
Tri-Synchronous Motion works best for on-air shots requiring significant movement. It is not useful when
moving the camera less than 10° or when the camera is not on the air.
By default, the Home position stores with current color settings and Tri-Sync. Other presets do not.
29