A Quick Look At The Camera; Features Of Interest During Installation; Features Of Interest During Operation - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

A Quick Look at the Camera

The RoboFLIP 30 HDBT in-ceiling HD PTZ camera is designed for recessed mounting. The features of
interest during installation are not visible after the installation is complete.

Features of Interest During Installation

Camera enclosure – 12.1 inch diameter with 15.9 inch flange; height 7.02 inches.
n
OneLINK/HDBaseT connector – For all connectivity and power.
n
Trim ring – Houses the multifunction button. Extends 0.5 inch from the flange of the camera enclosure
n
for a clean installation in a suspended tile ceiling.

Features of Interest During Operation

Camera lens – 30x zoom lens for crisp detail.
n
Camera shell – The lens rotates upward out of view when the camera is not sending video.
n
Multifunction button and IR sensor – The illuminated button in the trim ring indicates the camera's
n
current state. The sensor in the button receives signals from the remote. If it becomes necessary to
restore factory default settings, press and hold the button for 5 seconds.
Note
When the camera lens is visible, the camera is sending video.
3