Configuring Camera Behavior; Configuring Ip Streaming; Viewing The Rtsp Stream - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

Configuring Camera Behavior

This chapter covers managing the camera as a part of the room's AV environment.
What controls do you need?
Camera behavior and adjustments
Set or clear presets and preset chains
n
Set the speed for pan, tilt, or zoom motions
n
Focus the camera
n
Work with color and lighting adjustments (CCU scenes)
n
Frequency Selection (IR1, IR2, IR3) for controlling up to 3 cameras
n
independently with the remote
IR on/off for enabling/disabling control via the remote
n
Baud rate for RS-232 serial communication
n
Advanced camera settings
Status light – select color scheme, enable/disable, set behavior in
n
standby mode
Codec control mode
n
Video output resolution
n
Note
Vaddio's cameras all have very similar web interfaces. Some of the screen shots in this manual may be
from other models.

Configuring IP Streaming

S
TREAMING PAGE
IP streaming is disabled by default. To enable it, select Enable IP Streaming.
Two IP streaming protocols are available: RTSP and RTMP.
RTSP streaming delivers an IP stream that people can access from your network using a media player.
n
This is the camera's default protocol for IP streaming.
RTMP streaming sends a stream to a content service provider such as YouTube. No local preview is
n
available. To use RTMP streaming, you must have an account with a streaming service.

Viewing the RTSP Stream

1. Open a stream viewer such as VLC Media Player.
2. Select "Network stream" or your viewer's equivalent option.
3. Copy the streaming URL from the camera's Streaming page and paste it into the viewer as the URL for
the network stream.
Camera
System (General tab)
System (General tab)
23
Go to this screen