Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera
Restoring Factory Settings from the Web Interface
S
, F
YSTEM PAGE
IRMWARE TAB
Sometimes it's easiest to just start over. To restore the original factory settings...click Restore Factory
Settings. This will overwrite everything you have customized – custom CCU scenes and presets, soft DIP
switch settings, passwords, room labels, and more. For this reason, you may want to back up (export) the
camera's configuration after you set up the customizations you want. See
Saving (Exporting) or Restoring
(Importing) a
Configuration.
Restoring Factory Default Settings Via Hardware
If the camera's administrative controls are not accessible, use the multifunction status light/button to
restore factory defaults. Press and hold the button for 5 seconds.
77