Additional Settings - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

Additional Settings

S , G
YSTEM PAGE ENERAL TAB
The General tab of the System page provides access to:
Status light behaviors
n
Video behaviors
n
Interactions with the IR remote
n
Serial communication options
n
Setting Name
LED On/Off
LED On in Standby
LED Color Scheme
Point Light
Compensation
System Color Space
Image Flip
The status light can be turned off. The
Select Disabled to turn off the LED when the camera is in standby mode.
Status light color codes for Pro AV (broadcast) or UC (unified conferencing).
Default is Pro A/V.
Reduces the intensity of small, extremely bright areas (point light sources) that
would otherwise swamp the camera with light and make it difficult to see details
in areas with less intense lighting.
YCbCr or sRGB. The default is sRGB.
On by default; orients the video image correctly and sets the tilt motors to
respond appropriately to tilt commands from the remote, web interface, and
connected control devices.
Function
38