Video Mute; Camera Standby; Network And Communication Commands - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

video mute

Gets or sets the camera's video mute status. When video is muted, the camera sends black video with an
on-screen message stating that video mute is on. This can be desirable when preparing the room or when
privacy is needed.
Synopsis video mute {get | off | on | toggle}
Parameters get
off
on
toggle
Examples
video mute get
mute:
Returns video mute status.
video mute on
Transmits black video.

camera standby

Set or change camera standby status.
Synopsis camera standby { get | off | on | toggle}
Options get
off
on
toggle
Examples >camera standby off
OK
>
Brings the camera out of standby mode.
>camera standby get
standby:
OK
>
Returns the current standby state.

Network and Communication Commands

The following communication-related commands are available:
streaming ip enable
n
streaming settings get
n
network settings get
n
off
on
60
Returns the current video mute status.
Unmutes the video. Normal video resumes.
Changes the camera's video mute status.
Returns the camera's current standby state.
Brings the camera out of standby (low power)
mode.
Stops video and puts the camera in standby
mode.
Changes the camera's standby state – if it was
not in standby mode, it enters standby; if it was
in standby mode, it becomes active.