DO NOT USE THE MACHINE IF THE BASE CAN NOT BE LEVELED ON A FIRM
LEVEL SURFACE.
2
FT70
Figure 3-16. Base Leveling
1. Rotating Knob - Adjusts Foot/Caster
Height - Up/Down
2. Bubble Level Indicator
3121296
1
2
1
1001199907 A
1001199907 A
3
3
FT140
3. Adjuster Foot/Caster Wheel
4. Caster Wheel Brake - FT140 Only
Entering/Exiting The Platform
DO NOT EXCEED MAXIMUM PLATFORM CAPACITY. MAXIMUM CAPACITY
INCLUDES PERSONNEL IN PLATFORM PLUS WEIGHT IN TOOL TRAY OR ANY
OTHER WEIGHT PLACED IN PLATFORM.
1. Before entering platform, reach into platform below
the entry gates and attach your harness lanyard to the
platform lanyard attach point in the lower right-hand
corner of the platform.
2. Grasp the platform side rails and step onto the step
plate at the front of the base, then step into the plat-
form through the platform gates.
3. Once in the platform and the entry gates have fully
4
closed the platform is ready for operation.
BEFORE OPERATING PLATFORM CHECK AROUND AND OVERHEAD FOR ANY
OBSTACLES OR PERSONNEL THAT MAY COME INTO CONTACT WITH MACHINE
WHILE ELEVATING OR LOWERING THE PLATFORM. IF NECESSARY, EXIT
MACHINE AND REPOSITION BEFORE PROCEEDING.
4. Before exiting the platform, be certain platform is fully
lowered.
LIFTPOD by JLG
SECTION 3 - MACHINE OPERATION
3-15