Table of Contents
Advertisement
3.2
Technical data
Designation
Welding process
Welding range
Material
Power source
Welding current
Welding time
Welding sequence
Standard gun
Power supply
E-continuous current
E-continuous power
E-peak current
Open-circuit voltage
System of protection
Interfaces (option)
Ext. program selection
Compressed-air supply
Shielding gas supply
Dimensions
Weight*
Colour
Technical specifications are subject to change without notice.
* Slight deviations are possible depending on accessories.
WARNING
The "S" symbol is the symbol for welding current sources permitted for operation with
increased electrical danger. The "S" symbol on our stud welding devices refers
exclusively to the welding current circuit and not to the complete stud welding
equipment.
16
BMH-30i
Drawn arc stud welding (DA)
Electrode welding rectifier
®
SOYER
threaded studs, DIN EN ISO 13918 from
M8 - M24 or Ø 6 - 25 mm
Steel, stainless steel and heat-resistant steel (aluminium
conditionally depending on respective requirements)
Inverter technology
360 up to 3000 A stud welding
120 up to 450 A electrode welding
120 up to 300 A TIG welding
3 up to 2000 ms (only with operating mode "stud welding")
Up to 30 studs/min with Ø 6 mm | up to 3 studs/min with Ø 25 mm
PH-5L stud welding gun
CEE 125 A (3P + safety earth conductor)
3 x 400 V 50/60 Hz +10% -15%
2 A / phase
1400 VA
270 A / phase with 3 x 400 V (short-time operation)
85 V / DC (direct voltage)
IP21
Feeder interface:
15-pole socket (optional)
CNC interface :
9-pole socket(optional)
RS 232 interface:
9-pin plug (with SO-250 option)
PG.Select interface : 9-pole socket (optional)
max. 7 bar (compressed air only with optional automatic set)
max. 4 – 5 l/min.
710 x 790 x 1030 mm (w x h x d)
167 kg
RAL 5009 azure
Advertisement
Table of Contents
