5.3
Installation
Mounting a module on a DIN rail
Mounting a module on a DIN rail
2
Removing a module from a DIN rail
2
1
5.4
CC-Link IE TSN Connector Wiring
For the connection of CC-Link IE TSN connector, refer to the following.
User's manual for the master station used
5 INSTALLATION AND WIRING
30
5.3 Installation
1
1.
Hook the upper fixing tab on the bottom of the
module to the DIN rail.
2.
Push and engage the NZ2AW1GNAL on the DIN
rail.
1.
Insert a flathead screwdriver into the hook and pull
the hook to remove from the DIN rail.
2.
Lift the module on the hook side and remove it
using the fixing tab as the supporting point.