Appendix 3 Remote Buffer Memory - Mitsubishi Electric AnyWire ASLINK User Manual

Appendix 3
Data can be read/written from/to the remote buffer memory areas by the SLMPSND instruction in a program.
For how to read/write data from/to the remote buffer memory areas using the SLMPSND instruction, refer to the following.
Page 93 Remote buffer memory read
Note that the following instructions for reading/writing data from/to remote stations cannot be used.
• REMTO instruction
• REMTOD instruction
• REMTOIP instruction
• REMTODIP instruction
• REMFR instruction
• REMFRD instruction
• REMFRIP instruction
• REMFRDIP instruction
The following table lists the assignment of the remote buffer memory addresses of the NZ2AW1GNAL.
Address
0000H to 01FFH
0200H to 03FFH
0400H to 05FFH
1000H to 4FFFH
5000H to 5FFFH
Remote Buffer Memory
Item
Parameter area
Monitor area
Module control area
Slave parameters
Slave information
APPX

Appendix 3 Remote Buffer Memory

A
147