Mitsubishi Electric AnyWire ASLINK User Manual page 184

Output response delay time
The figure below shows the time between the remote register device turning on/off and a signal output of the slave module
turning on/off.
The output response delay time is the total of  to  in the following figure.
(1)
(2)
(3)
(1) I/O device
(2) AnyWireASLINK system
(3) CC-Link IE TSN
No. Description

Processing time of the NZ2AW1GNAL

Transmission time
 Output response time on the slave module
APPX
182
Appendix 5 Processing Time
Input from CC-Link IE TSN side
Required time
1.0ms
• Bit data: Bit transmission cycle time  2
• Word data: Word transmission cycle time
The transmission cycle time varies depending on the specified number of bit data points and the
specified number of word data points.
Page 178 Transmission cycle time
Refer to the manuals for the slave modules connected to the system and the devices connected
to the slave modules (manufactured by Anywire Corporation).
Ó
Ò
Output
Ô