Table of Contents
Advertisement
Quick Links
Base Unit/Blank Cover
Thank you for purchasing the Mitsubishi Electric programmable
controller MELSEC-Q series.
Prior to use, please read this and relevant manuals thoroughly to
fully understand the product.
© 2013MITSUBISHI ELECTRIC CORPORATION
Q Series Large Type
(AnS Series Size)
Q35BLS
Q38BLS
Q65BLS
Q68BLS
Q55BLS
MODEL
MODEL
CODE
IB(NA)-0800495-E(1806)MEE
User's Manual
Q35BLS-D
Q38BLS-D
Q65BLS-D
Q68BLS-D
Q55BLS-D
ANS-Q-LARGE-U
QG69LS
13J290
Advertisement
Table of Contents
Related Manuals for Mitsubishi Electric ANS-Q-LARGE-U
Summary of Contents for Mitsubishi Electric ANS-Q-LARGE-U
- Page 1 QG69LS Q38BLS Q38BLS-D Q65BLS Q65BLS-D Q68BLS Q68BLS-D Q55BLS Q55BLS-D Thank you for purchasing the Mitsubishi Electric programmable controller MELSEC-Q series. Prior to use, please read this and relevant manuals thoroughly to fully understand the product. MODEL ANS-Q-LARGE-U MODEL 13J290 CODE IB(NA)-0800495-E(1806)MEE ©...
- Page 2 CONDITIONS OF USE FOR THE PRODUCT (1) Mitsubishi programmable controller ("the PRODUCT") shall be used in conditions; i) where any problem, fault or failure occurring in the PRODUCT, if any, shall not lead to any major or serious accident; and ii) where the backup and fail-safe function are systematically or automatically provided outside of the PRODUCT for the case of any problem, fault or failure occurring in the PRODUCT.
- Page 3 Notwithstanding the above, restrictions Mitsubishi may in its sole discretion, authorize use of the PRODUCT in one or more of the Prohibited Applications, provided that the usage of the PRODUCT is limited only for the specific applications agreed to by Mitsubishi and provided further that no special quality assurance or fail-safe, redundant or other safety features which exceed the general specifications of the PRODUCTs are required.
- Page 4 Chinese standardized law. This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.
-
Page 5: Table Of Contents
CONTENTS 1. OVERVIEW ....................1 Overview ....................1 Features ....................1 Supplied Parts..................3 2. SYSTEM CONFIGURATION................5 System Configuration................5 Precautions for System Configuration..........10 Modules That Cannot be Mounted on the Q Series Large Type Base Unit (AnS Series Size) ............... 11 3. - Page 6 TERMS Unless otherwise specified, this manual uses the following generic terms and abbreviations to explain the Q series large type base units (AnS series size) and Q series large type blank cover (AnS series size). Term Description A generic term for the Q series large type main base unit Q series large type base unit (AnS series size) and Q series large type extension base (AnS series size)
- Page 7 Term Description A generic term for the A52B, A55B, and A58B extension base units A generic term for the A62B, A65B, and A68B extension base units The abbreviation for the QA6ADP QA conversion adapter QA6ADP module The abbreviation for the A large type extension base unit on ...
-
Page 8: Overview
1. OVERVIEW Overview The products are used to replace the AnS series with the Q series when the existing installation site and cables are utilized. This manual explains specifications, component devices, part names, settings, mounting, and installation of the Q series large type base unit (AnS series size) and Q series large type blank cover (AnS series size). - Page 9 4m A Q series module Q series large type blank cover (AnS series size) The renewal tool manufactured by MITSUBISHI ELECTRIC ENGINEERING COMPANY LIMITED (hereafter, abbreviated as renewal tool) can be mounted on the module, and a connector and terminal block used with the AnS series can be used without wiring change.
-
Page 10: Supplied Parts
Supplied Parts (1) Q series large type main base unit (AnS series size) (panel mounting type) Product Model Quantity Remarks Q35BLS Q38BLS Q series large type main base Q65BLS unit (AnS series size) Q68BLS Q55BLS × Base unit mounting screw 25 screw This manual IB-0800495... - Page 11 Product Model Quantity Remarks This manual IB-0800495 Safety Guidelines IB-0800423 For a combination of the DIN rail mounting adapter, refer to the following: Q6DIN1: Q38BLS-D and Q68BLS-D Q6DIN2: Q35BLS-D, Q65BLS-D, and Q55BLS-D *2 The stopper for DIN rail mounting adapter is not included with this base unit since the end fitting is substitutable.
-
Page 12: System Configuration
2. SYSTEM CONFIGURATION System Configuration This section explains system configuration when using the Q series large type base unit (AnS series size). The following modules can be mounted on the CPU slot of the Q series large type base unit (AnS series size). - Page 13 For a combination of the CPU modules and base units, refer to the "Precautions" section. The following table shows restrictions on system configuration. Maximum number of Q00UCPU, Q01UCPU, and Q02UCPU: 4 extension stages extension stages of Modules other than the above: 7 extension stages extension base units Maximum number of •...
- Page 14 Precautions • Use extension cable so that the overall extension length can be within 13.2m. • Do not install the extension cable together with the main circuit (high voltage and high current) line or bring them close to each other. Keep a distance of 100mm or more between them.
- Page 15 (2) System configuration using the MELSECNET/H remote I/O module Main base unit Slot number Q series large type main base unit (AnS series size) (Q3 BLS, Q3 BLS-D), Q series main base unit (Q3 B, Q3 DB), or Q series large type main base unit (Q3 BL) MELSECNET/H remote I/O module Power...
- Page 16 The following table shows restrictions on system configuration. Maximum number of extension stages of 7 extension stages extension base units Maximum number of 64 modules mountable I/O modules Applicable main base Q33B, Q35B, Q38B, Q35BLS, Q38BLS, Q35BLS-D, unit model Q38BLS-D, Q35BL, and Q38BL Model requiring no Q52B, Q55B, Q55BLS, power supply module...
-
Page 17: Precautions For System Configuration
Precautions for System Configuration This section explains precautions for using the products. (1) A multiple CPU system cannot be constructed using the Q series large type main base unit (AnS series size). (2) To construct a multiple CPU system with the Q series large type extension base unit (AnS series size), use a main base unit, ... -
Page 18: Modules That Cannot Be Mounted On The Q Series Large Type Base Unit (Ans Series Size)
Modules That Cannot be Mounted on the Q Series Large Type Base Unit (AnS Series Size) This section explains modules that cannot be mounted on the Q series large type base unit (AnS series size). (1) Two-slot module Q64TCRTBW, Q64TCRTBWN, Q64TCTTBW, Q64TCTTBWN, QD70D4, QD70D8, QJ71LP21S-25, and QJ71GP21S-SX (2) Module on which the Q series large type blank cover (AnS series... -
Page 19: Specifications
3. SPECIFICATIONS Specifications of the Q Series Large Type Base Unit (AnS Series Size) The following tables show performance specifications of the Q series large type base unit (AnS series size). (1) Q series large type main base unit (AnS series size) Model Item Q35BLS... - Page 20 (2) Q series large type extension base unit (AnS series size) Model Item Q65BLS Q68BLS Q65BLS-D Q68BLS-D Number of mountable I/O modules Extendability Extendable Applicable module Q series module 5 VDC internal current 0.11A 0.12A 0.11A 0.12A consumption 6hole (for M5 screw) Size of mounting hole 130mm 118mm...
-
Page 21: Specifications Of The Q Series Large Type Blank Cover (Ans Series Size)
Specifications of the Q Series Large Type Blank Cover (AnS Series Size) The following tables show performance specifications of the Q series large type blank cover (AnS series size). Model Item QG69LS 108mm External dimensions 34.5mm 54mm Weight 0.03kg... -
Page 22: Parts Names
4. PARTS NAMES Parts Names This section explains the part names of the Q series large type base unit (AnS series size) and Q series large type blank cover (AnS series size). (1) Q series large type base unit (AnS series size) (panel mounting type) Name Description... - Page 23 (2) Q series large type base unit (AnS series size) (DIN rail mounting type) Name Description Connector for connecting an extension cable (for Extension cable signal communications with the extension base unit) Base cover Protective cover of extension cable connector Connector for mounting power supply module, CPU Module connector module, Q series large type I/O module, and...
- Page 24 (3) Part names of the Q series large type blank cover (AnS series size) Name Description Hook for fixing the Q series large type blank cover Top fixing hook (AnS series size) to the Q series module top Hook for fixing the Q series large type blank cover Bottom fixing hook (AnS series size) to the Q series module bottom Screw for fixing a module to the Q series large type...
-
Page 25: Mounting And Installation
5. MOUNTING AND INSTALLATION Handling Precautions This section explains handling precautions for the Q series large type base unit (AnS series size) and Q series large type blank cover (AnS series size). (1) Do not disassemble the Q series large type base unit (AnS series size) since it is precision apparatus. -
Page 26: Precautions For Installing The Q Series Large Type Base Unit (Ans Series Size)
Precautions for Installing the Q Series Large Type Base Unit (AnS Series Size) (1) Module installation position Provide the following distances between the top and bottom of the module and other structure or components to ensure ventilation for heat dissipation and to change the module easily. Indicates the control panel top, Programmable wiring duct, or any part position. - Page 27 (b) Do not install it in the directions shown below. Horizontal installation Vertical mounting (3) Install the base unit on a flat surface. When the base unit is installed on an uneven surface, the printed- circuit board may be strained, resulting in a malfunction. (4) Do not install the programmable controller together with a vibration source such as a large electromagnetic contactor or non-fuse breaker.
-
Page 28: Mounting And Installation Of The Q Series Large Type Base Unit (Ans Series Size)
Mounting and Installation of the Q Series Large Type Base Unit (AnS Series Size) The following explains how to mount or install the Q series large type base unit (AnS series size). (1) Installing a base unit on a panel To install a base unit on a panel such as a control panel, tighten the base unit mounting screws. - Page 29 (c) Attaching the end fitting Attach the end fitting L and R on the both ends of a DIN rail. Slide them to the position of the end fitting mounting holes on the base unit. Loosen the stopper screws and hitch the hooks of the stopper to the DIN rail.
-
Page 30: Mounting/Removing The Q Series Module
Mounting/Removing the Q Series Module The following shows procedures for mounting the Q series module on the Q series large type base unit (AnS series size). (1) Attaching the Q series large type blank cover The following shows a procedure for attaching the Q series large type blank cover (AnS series size) to the Q series module. - Page 31 (2) Removing the Q series large type blank cover (AnS series size) To remove the Q series large type blank cover (AnS series size) from the Q series module, remove the bottom fixing hook first. (3) Mounting to/removal from the Q series large type base unit For procedures of mounting/removing the Q series module on/from the Q series large type base unit, refer to the following manual.
-
Page 32: External Dimensions
6. EXTERNAL DIMENSIONS The following shows external dimensions diagrams of the Q series large type base unit (AnS series size) and Q series large type blank cover (AnS series size). Q Series Large Type Base Unit (AnS Series Size) (1) Q35BLS 4-Mounting screw (M5 25) Unit: mm... - Page 33 (3) Q38BLS 4-Mounting screw (M5 25) Unit: mm (4) Q38BLS-D 48.5 Unit: mm (5) Q65BLS 4-Mounting screw (M5 25) Unit: mm...
- Page 34 (6) Q65BLS-D 48.5 Unit: mm (7) Q68BLS 4-Mounting screw (M5 25) Unit: mm (8) Q68BLS-D 48.5 Unit: mm...
- Page 35 (9) Q55BLS 4-Mounting screw (M5 25) Unit: mm (10) Q55BLS-D 48.5 Unit: mm...
-
Page 36: Q Series Large Type Blank Cover (Ans Series Size)
Q Series Large Type Blank Cover (AnS Series Size) (1) QG69LS (1.8) (1.8) 34.5 Unit: mm... - Page 38 20 Waterford Office Park, 189 Witkoppen Road, Avenida Adelino Cardana, 293, 21 andar, Fourways, South Africa Bethaville, Barueri SP, Brazil Tel : +27-11-658-8100 Tel : +55-11-4689-3000 Germany MITSUBISHI ELECTRIC EUROPE B.V. German China MITSUBISHI ELECTRIC AUTOMATION (CHINA) Branch LTD. Mitsubishi-Electric-Platz 1, 40882 Ratingen, No.1386 Hongqiao Road, Mitsubishi Electric...