Mitsubishi Electric AnyWire ASLINK User Manual page 44

Displayed items
Item
Bit data points setting
Word data use setting
Word data points
setting
Word data start
address setting
Word data points
setting per frame
Startup operating mode
setting
6 CONFIGURATION
42
6.2 Parameter Setting
Setting
Set the number of bit data points.
The transmission cycle time is determined based on the specified
number of bit data points. ( Page 171 Transmission cycle time)
Set whether to use the word data.
Set the number of word data points to be used.
Because the number of word data points should be the same
between input and output, set the number of word data points to
that of input or output, whichever is larger.
Set the word data transmission start address.
Set the number of points to be stored in one frame of word
transmission of AnyWireASLINK.
Set whether to acquire slave module information at start-up.
*1
*1
*1
Setting range
• 0: 64 points (32 input points/32 output points)
• 1: 128 points (64 input points/64 output points)
• 2: 256 points (128 input points/128 output points)
• 3: 512 points (256 input points/256 output points)
• 4: 1024 points (512 input points/512 output points)
• 10: 0 points (0 input points/0 output points)
(Default: 3: 512 points (256 input points/256 output points))
• 0: Not use
• 1: Use
(Default: 0: Not use)
• 0: Not use
• 1: 2 words (input 1 word, output 1 word)
• 2: 4 words (input 2 words, output 2 words)
• 3: 8 words (input 4 words, output 4 words)
• 4: 16 words (input 8 words, output 8 words)
• 5: 32 words (input 16 words, output 16 words)
• 6: 64 words (input 32 words, output 32 words)
• 7: 128 words (input 64 words, output 64 words)
• 8: 256 words (input 128 words, output 128 words)
• 9: 512 words (input 256 words, output 256 words)
• 10: 1024 words (input 512 words, output 512 words)
(Default: 0: Not use)
0 to 511
(Default: 0)
• 0: Not use
• 1: 2 words (input 1 word, output 1 word)
• 2: 4 words (input 2 words, output 2 words)
• 3: 8 words (input 4 words, output 4 words)
• 4: 16 words (input 8 words, output 8 words)
• 5: 32 words (input 16 words, output 16 words)
*1
(Default: 0: Not use)
• 0: Without slave information acquisition
• 1: With slave Information acquisition
(Default: 0: Without slave information acquisition)
*2
*3
*4
*5