Mitsubishi Electric AnyWire ASLINK User Manual page 148

Parameter access target module ID specification
■Device No.
Name
Parameter access target module ID specification
■Description
Specify the target ID for accessing the parameters of individual slave modules.
The IDs that can be set are as follows.
ID
0000H to 01FFH
0200H to 03FFH
0400H to 05FFH
0600H to 07FFH
Change ID specification
■Device No.
Name
Change ID specification
■Description
Specify a new ID of when changing the remote address.
The ID that can be set is the same as Parameter access target module ID specification (RWw1).
For details, refer to the remote address change function below.
Page 59 Remote Address Change Function
AnyWireASLINK word output signal
■Device No.
Name
AnyWireASLINK word output signal
■Description
When the word output information of a slave module is written, the slave module automatically outputs a signal.
■Example
For a word output slave module (address: 508) with 2-word data points, the 2 words (RWw21C, RWw21D) from RWw21C are
occupied for the word output signal because the address is 508.
Output signals
RWw20
RWw21
RWw22
RWw23
RWw24

RWw21C
RWw21D
RWw21E
RWw21F
*1 The occupied area when the setting address of the word output slave module with 2-word data points is 508
APPX
146
Appendix 2 Remote Register
Slave module type
Bit output slave module
Bit input slave module
Bit I/O combined slave module
Word output slave module
Word input slave module
Word I/O combined slave module
Device No.
RWw1
Device No.
RWw2
Device No.
RWw20 to RWw21F
Word output information area
0
1
2
3
4

*1
508
*1
509
510
511