When changing parameters
Operating procedure
1.
Display the CC-Link IE TSN configuration window.
[Navigation window] [Parameter] [Module Information] Master module model name [Basic Settings]
[Network Configuration Settings]
2.
Open the "Parameter of Slave Station" window.
Select the NZ2AW1GNAL from the station list Right click [Parameter of Slave Station]
3.
Set "Parameter read" for "Method Selection".
4.
Click the [Execute Parameter Processing] button.
5.
Click the [Yes] button.
6.
The parameters are read from the NZ2AW1GNAL.
6 CONFIGURATION
46
6.2 Parameter Setting