Configuration Management - Endress+Hauser Proline Promass H 300 PROFINET Operating Instructions Manual

Proline Promass H 300 PROFINET
Parameter
Assign SSID name
SSID name
Connection state
Received signal strength
* Visibility depends on order options or device settings
Parameter
Operating time
Last backup
Endress+Hauser
Prerequisite
–
• The User-defined option is
selected in the Assign SSID
name parameter.
• The WLAN access point
option is selected in the
WLAN mode parameter.
–
–
10.6.7

Configuration management

After commissioning, you can save the current device configurationor restore the previous
device configuration.
You can do so using the Configuration management parameter and the related options
found in the Configuration backup submenu.
Navigation
"Setup" menu → Advanced setup → Configuration backup
‣
Configuration backup
Operating time
Last backup
Configuration management
Backup state
Comparison result
Parameter overview with brief description
Description
Indicates how long the device has been in
operation.
Shows when the last data backup was saved
to HistoROM backup.
Description
Select which name will be used
for SSID: device tag or user-
defined name.
Enter the user-defined SSID
name (max. 32 characters).

The user-defined SSID
name may only be
assigned once. If the SSID
name is assigned more
than once, the devices
can interfere with one
another.
Displays the connection status. • Connected
Shows the received signal
strength.
User interface / Selection
Days (d), hours (h), minutes
(m) and seconds (s)
Days (d), hours (h), minutes
(m) and seconds (s)
Commissioning
Selection / User Factory setting
entry / User
interface
• Device tag User-defined
• User-defined
Max. 32-digit EH_device
character string designation_last 7
comprising numbers, digits of the serial
letters and special number (e.g.
characters EH_Promass_300_A
802000)
Not connected
• Not connected
• Low High
• Medium
• High
→  125
→  125
→  126
→  126
→  126
Factory setting
–
–
125