Rigol DS8000-R Series User Manual page 37

Chapter 1 Quick Start
3. Horizontal Time Base
Represents the time length per grid in the horizontal axis of the screen.
4. Sample Rate/Memory Depth
Displays the current sample rate and memory depth of the analog channel.
⚫
The sample rate and the memory depth will change along with the
⚫
horizontal time base.
5. Auto Measurement Label
Click the label, and up to 41 waveform parameters are available for auto
measurement. It also offers full-memory hardware measurement function.
6. Waveform Memory
Provides a diagram of the position of the screen waveform in the memory.
waveform in the memory
7. Trigger Position
Displays the trigger position of the screen waveform and that of the waveform in
the memory.
8. Run/Stop Label
In the run state, the label is displayed in green; while in the stop state, it is
displayed in red. You can click the label "STOP/RUN" to control its operating
status.
9. Horizontal Position
Displays the horizontal position. Click this label, and you can adjust the
horizontal position.
10. Trigger Type
Displays the currently selected trigger type and trigger condition setting. When
you select different trigger types, different labels are displayed. For example,
represents triggering on the rising edge in "Edge" trigger.
11. Trigger Source
Displays the currently selected trigger source (CH1-CH4, AC Line, or EXT). When
you select different trigger sources, different labels are displayed. For example,
denotes that CH1 is selected as the trigger source.
12. Trigger Level
When CH1-CH4 or EXT is selected as the trigger source, you need to set a
⚫
proper trigger level.
DS8000-R User Guide
screen waveform
RIGOL
1-15