Table of Contents
Advertisement
Chapter 12 Reference Waveform
To Save to Internal Memory
Click SaveToRef to save the displayed waveform for the specified source to the
internal memory as the reference waveform.
Note:
This operation only saves the reference waveform to the volatile memory, and
the waveform will be cleared at power-off.
To Clear the Display of the Reference Waveform
Click Clear to clear the display of the current reference waveform on the screen.
Meanwhile, the VScale and VOffset menus for the reference waveform are grayed
out and disabled.
Note:
This operation only clears the display of the reference waveform on the screen,
and the reference waveform is still saved in the memory.
To View Details of the Reference Waveform
Click More → Details, and the detailed information about all the reference
waveforms will be displayed on the screen in the form of a list. Click Details again to
close the details list. You can also click on the icon
the table to close it.
To Reset the Reference Waveform
Click More → Reset, and the reference waveform is restored to the position where
the source channel waveform is located when the SaveToRef operation was
executed.
DS8000-R User Guide
at the right-upper corner of
RIGOL
12-3
Advertisement
Table of Contents
