RIGOL
(2) The Option install key is activated, and click this menu item to start
installing the option.
(3) After installation, a prompt message "Option activated successfully" is
displayed.
Note: After the option has been installed, you are recommended to
restart the instrument.
Tip
Only 1 option license file of one instrument is allowed to be stored in the
⚫
same USB storage device, but the USB storage device can store the option
license file of several different instruments. You are not allowed to modify
the licensed filename.
During the installation process, you are not allowed to power off the
⚫
instrument or pull out the USB storage device.
Sending the SCPI commands (
⚫
options is supported. Installing options by inputting the license code
manually is not supported.
1-24
:SYSTem:OPTion:INSTall <license>)
Chapter 1 Quick Start
to install
DS8000-R User Guide