Remove The Measurement Result; Statistical Function - Rigol DS8000-R Series User Manual

Chapter 6 Operations and Measurements
Tip
Modifying the threshold will affect the measurement results of
⚫
the time, delay and phase parameters.
If you select "Manual" under Amp Method, the measurement
⚫
results of other parameters may be affected.
"Histogram" and "Max-Min" are the internal measurement
⚫
algorithm for the oscilloscope. The "Histogram" method here is
different from the Histogram function of the oscilloscope.

Remove the Measurement Result

This oscilloscope allows you to remove the measurement results of the parameters.
Click Measure → Remove to enter the "Remove" sub-menu.
Click Remove to remove the last added measurement item. Note that clicking
⚫
this key one time can only remove one measurement item. When you remove a
measurement item, the measurement result of the last added item at the
bottom of the screen will be removed.
Click Remove All to remove all the displayed measurement items.
⚫
Click Indicator to enable or disable the indicator.
⚫
Besides, you can also click Measure → Add → Remove to enter the "Remove"
sub-menu.
Tip
If the "Remove" sub-menu is not displayed in the current menu, when you select
a certain measurement item, the system will automatically enter the "Remove"
sub-menu.

Statistical Function

Performs statistics and displays the measurement results (Cur, Avg, Max, Min, Dev,
and Cnt) of at most 10 items, as shown in the figure below.
DS8000-R User Guide
RIGOL
6-35