Email - Rigol DS8000-R Series User Manual

Chapter 19 System Utility Function Setting
Click Ink Saver continuously to enable or disable the ink saver setting. If
disabled, you need to set Color. Click Color continuously to select "Gray"
or "Color".

Email

This oscilloscope supports sending files via emails. Click Utility → More → Email to
enter the email setting menu.
1. Set the Email Server
Click Settings to enter the email server login setting menu. The following
window is displayed. After the setting, click OK to complete the server login. To
cancel login, click Cancel to exit or click on the icon
corner of the window to exit. If you exit the server setting window, you can click
SMTP, Port, UserName, or PassWord to reopen the window.
Set SMTP
⚫
Click SMTP to set the mail transmission protocol. For detailed settings of
mail transmission protocol, refer to descriptions in "To Create a Folder".
Set the port
⚫
Click Port to set the protocol port in the pop-up numeric keypad. Its range
is from 1
Set the user name
⚫
Click UserName to set the user name of the server. For detailed setting
methods for the user name, refer to descriptions in "To Create a Folder".
Set the password
⚫
Click PassWord to set the password of the server. For detailed setting
methods for the password, refer to descriptions in "To Create a Folder".
Email test
⚫
Click Test to test whether the e-mail server is properly set.
Restore default settings
⚫
DS8000-R User Guide
65535.
to
RIGOL
at the upper-right
19-13