Rigol DS8000-R Series User Manual page 41

Chapter 1 Quick Start
Select "Trigger zone A":
⚫
Draw the region for Trigger zone A;
➢
Open Trigger zone A;
➢
Open the "Zone Trigger" menu.
➢
Select "Trigger zone B":
⚫
Draw the region for Trigger zone B;
➢
Open Trigger zone B;
➢
Open the "Zone Trigger" menu.
➢
Select "Histogram":
⚫
Draw the region for the histogram;
➢
Open the "Histogram" menu.
➢
Select "Horizontal zoom in": expands the waveforms in the horizontal direction.
⚫
Select "Horizontal zoom out": compresses the waveforms in the horizontal
direction.
Select "Vertical zoom in": expands the waveforms in the vertical direction. Select
⚫
"Vertical zoom out": compresses the waveforms in the vertical direction.
Select "Waveform zoom in": expands the waveforms both in the horizontal and
⚫
vertical direction. Select "Waveform zoom out": compresses the waveforms both
in the horizontal and vertical direction.
Tip
Click on the "Draw rect" icon to switch between the rectangle drawing and
waveform operation modes.
Click on the "Draw rect" icon, if
drawing mode is enabled. Click on the "Draw rect" icon, if
indicates that the waveform operation mode is enabled. By default, the waveform
operation mode is enabled.
Note: The menu displayed on the externally connected screen or the icon available
to be enabled on the screen can all be operated by Web Control. However, Web
Control does not support the following operations:
Double-click the mouse left button to stop recording/playing of the waveforms;
⚫
or stop the self-calibration.
DS8000-R User Guide
is displayed, it indicates that the rectangle
RIGOL
is displayed, it
1-19