Rigol DS8000-R Series User Manual page 105

Chapter 5 To Trigger the Oscilloscope
RIGOL
Edge Count:
Click Edges to set the value of "N" in Nth edge trigger. Use the pop-up numeric
keypad or scroll with the mouse to set the edge count. Its available range is from 1 to
65535.
Trigger Mode:
For details, refer to descriptions in "Trigger Mode".
Trigger Parameter Setting:
Set the trigger parameter (noise rejection) under this trigger type. For details, refer
to descriptions in "Noise Rejection".
Trigger Level:
Refer to "Trigger Level". The current trigger level value is displayed at the
upper-right corner of the screen.
DS8000-R User Guide 5-31