Trunk Groups - NEC SL1000 Features And Specifications Manual

ISSUE 2.0
Description
Trunk Groups let you optimize trunk usage for incoming and outgoing calls. Each group can be
accessed by an Access Code plus the group number. There are 25 available Trunk Groups and you
set the access order in trunk group programming.
Conditions
• Unless a user preselects a trunk, Trunk Group programming selects the trunk Speed Dialing used
for trunk calls.
• If a user dials a number that is not programmed in ARS, the system can route the call to a trunk
group.
• All DID trunks of the same type should be placed in the same trunk group. These trunk groups must
then be assigned to a DID Translation Table.
• Trunks ring extensions according to Ring Group programming.
Default Settings
All trunks are in group 1.
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Placing
Dial Tone Detection
Direct Inward Dialing (DID)
Programmable Function Keys
Ring Groups
Trunk Group Routing
Features and Specifications Manual
SL1000/SL1100

Trunk Groups

T
1-701