NEC SL1000 Features And Specifications Manual page 460

Hide thumbs Also See for SL1000:

Table of Contents

SL1000/SL1100

Guide to Feature Programming

Program Num-

Note 1) Change to DTMF Operation

In PRG 26-05-02 the @ symbol will have different operation for Analogue trunks or ISDN trunks.

Analogue Trunks

At the point in the dialled digits where the @ appears the SL1000/SL1100 will revert to DTMF dialling. This is only required

when the analogue trunk is set the Loop Disconnect dialling in PRG 14-02-01.

At the point in the dialled digits where the @ appears the SL1000/SL1100 will stop dialling and wait for the CONNECT from

the indirect carrier. The SL1000/SL1100 will then continue to dial DTMF in the B-channel. The DTMF digits will be received by

the indirect carrier for routing.

This is only required for indirect carriers that have a two stage setup process where the Access code is dialled in the D-chan-

nel to the direct carrier and all other digits are dialled as DTMF in the B-channel to the indirect carrier.

Note 2) Order of LCR Routing Digits

When a user dials a number that is routed by LCR the individual LCR elements will be dialled to line as shown below.

Program Name

LCR Mode Option

Dial analyse Table

LCR Carrier Table

Delete Digits

Authorization table number

Cost Center Code

Authorization Code Table

Cost Center Codes

Manual Override Access Code Table

Manual Override Exemption Table

LCR-Least Cost Routing