NEC SL1000 Features And Specifications Manual page 451

ISSUE 2.0
Programming Flowchart of ISDN-PRI - Placing Calls
In PRG 10-03-03,
In PRG 10-03-06, determine the length of cable used to connect from
In PRG 10-03-08,
enter '0'.
In PRG 20-08-02,
enter 0 to disable
outgoing calls.
In PRG 20-06-01, assign
Class of Service to extensions.
Stop
In PRG 20-08-01, ebter
0 to disable calling
number display by Telco.
In PRG 20-13-31,
enter 0 to disable trunk
ID display by Telco.
Features and Specifications Manual
Start
In PRG 10-03-01, determine the mode of the
IP4WW-1PRIU-C1 (0=not set, 1=T-Bus)
Is the CRC
Multi-Frame
No
ebter '0'.
(CRC4)
used?
In PRG 10-03-04, select the Layer 3 timer type (1-5). The timer
value is set up in PRG 81-06 (T-Bus)
the CSU to the IP4WW-1PRIU-C1
(0=0-40m, 1=40-81m, 2=81-122m, 3=122-162m, 4=162-200m)
Is the Dial
Sending Mode
Enblock
Enblock or
Overlap
Sending?
Should system users be able to place
No
outgoing calls on trunks?
Should Telco display the
No calling number for outgoing
calls?
Should Telco display the
trunk identification for
No
outgoing calls the extension
places?
Go To
In PRG 10-03-03,
Yes
ebter '1'.
In PRG 10-03-08,
Overlap
enter '1'.
In PRG 10-03-09, select
either Keypad Facility (0) or
Called Party Number (1) for
the dial information element.
Yes
enter '1' to enable
In PRG 20-08-13, enter
Yes
1 to enable calling
number display by Telco.
In PRG 20-13-31,
Yes
enter 1 to enable trunk
ID display by Telco.
A
SL1000/SL1100
PRG 20-08-02,
outgoing calls.
1-441
I