NEC SL1000 Features And Specifications Manual page 140

SL1000/SL1100
Program
Number
15-06-01
15-07-01
15-13-01
15-13-02
20-02-06
20-02-09
C
20-06-01
20-07-12
20-08-02
20-13-13
21-01-15
21-01-16
21-01-17
21-02-01
21-15-01
24-02-07
24-02-10
82-08-01
(MF Level)
Operation
To place a call over a trunk group:
1. Go off-hook.
2. Dial 804.
3. Dial trunk group number (01~25).
4. Dial the number.
- OR -
1. At the Multiline Terminal, press the trunk group key (PRG 15-07-01 or SC 851:
group).
2. Dial the number.
To place a call using Trunk Group Routing:
1. Go off-hook.
1-130
Program Name
Trunk Access Map for Extensions
Programmable Function Keys
Loop Keys - Outgoing Option
Loop Keys - Incoming Option
System Options for Multiline Telephones - Prese-
lection Time
System Options for Multiline Telephones - Dis-
connect Supervision
Class of Service for Extensions
Class of Service Options (Administrator Level) -
Trunk Port Disable
Class of Service Options (Outgoing Call Service)
- Trunk Outgoing Calls
Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
System Options for Outgoing Calls - Supervise
Dial Detection Timer
System Options for Outgoing Calls - Restriction
Digit in Outgoing Disable on Incoming Line
Trunk Group Routing for Extensions
Individual Trunk Group Routing for Extensions
System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
System Options for Transfer - Disconnect Trunk
to Trunk Timer
Sidetone Volume Setup
Default
1
Refer to Programming Manual.
0: Programming Function Key No.
= 01-32
0: Programming Function Key No.
= 01-32
5 (seconds)
1
All extension port = Class 1
COS 01~15 = 1
COS 01~15 = 1
COS 01~15 = 1
0
20 (seconds)
4
1
0
1800 (seconds)
0 (seconds)
6
Central Office Calls, Placing
ISSUE 2.0
Note
(SL1100)
*
02 +