NEC SL1000 Features And Specifications Manual page 30

SL1000/SL1100
2. Dial your Account Code (1~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows an
3. Dial * .
- OR -
Press your Account Code key (PRG 15-07 or SC 851: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting
the system prompts you for your Account Code. You may also use this procedure if your system has
Optional Account Codes.
A
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
Press a line key or dial a code to access a trunk. Refer to
for more information.
*
2. Dial .
- OR -
Press your Account Code key (PRG 15-07 or SC 851: code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and #).
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes
are hidden, each digit you dial shows an
4. Dial * .
- OR -
Press your Account Code key (PRG 15-07 or SC 851: code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for Single Line Terminals.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected
trunk.
*
2. Dial .
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial * .
To enter an Account Code at a Single Line Terminal:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to
more information.
2. Dial * .
3. Enter Account Code (1~16 digits).
4. Dial * .
1-20
* on the telephone display.
Central Office Calls, Placing on page 1-127
* on the telephone display.
Central Office Calls, Placing on page 1-127
ISSUE 2.0
for
Account Code Entry