NEC SL1000 Features And Specifications Manual page 739

ISSUE 2.0
Program Num-
ber
80-04-07 Call Progress Tone Detector Setup - ON maximum time
80-04-08 Call Progress Tone Detector Setup - OFF minimum time
80-04-09 Call Progress Tone Detector Setup - OFF maximum time Type 1 (DT) = 1 (60ms)
Operation
Calling your Mailbox
To call your mailbox:
Multiline Terminal
1. Press your Voice Mail key (PRG 15-07 or SC 851: 77).
- OR -
Press Speaker key and dial the Voice Mail Master Number. After Voice Mail Answers, dial your
mailbox number.
Your mailbox number is normally the same as your extension number. You may optionally dial a co-
worker's mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.
Normally, your Message Waiting LED goes out (if applicable). If it continues to flash, you have
unanswered Message Waiting requests or a new General Message.
Single Line Terminal
1. Lift the handset and dial
If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox
number instead. You can also use this procedure from your own telephone to call a co-worker's
mailbox.
2. If requested by Voice Mail, enter your security code.
Recording your Call
To record your active call in your mailbox:
Features and Specifications Manual
Program Name
* 8.
SL1000/SL1100
Default
Type 1 (DT) = 0
Type 2 (BT) = 20 (630ms)
Type 3 (RBT) = 40 1230ms)
Type 4 = 0
Type 5 = 0
Type 1 (DT) = 1 (60ms)
Type 2 (BT) = 12 (390ms)
Type 3 (RBT) = 52 (1590ms)
Type 4 = 0
Type 5 = 0
Type 2 (BT) = 14 (450ms)
Type 3 (RBT) = 80 (2430ms)
Type 4 = 0
Type 5 = 0
V
1-729